Setting Default Miscellaneous Values in X9

Setting Default Miscellaneous Values in X9

To set the default Miscellaneous Values, first make sure you have your post processor loaded, and backed up.
(Making a Zip2go of a part will put a copy of your current post in the file for back up)
 
Then go to Settings and down to Machine Definition Manager



In the Machine Definition Manager go to the Edit Control Definition 


In the Control Definition go to the Control Topics, and down to Misc. Int/Real Values and set the Integers and Reals as needed



Then click on the green check, tell yes to save it, and exit.


    • Related Articles

    • Setting Default Tool Settings

      This solution will show how to set Tool Setting defaults in Mastercam. In your Toolpath Manager you will need to expand the Properties and go to Files where you can find the Operations Defaults, and click on the exclamation point.  Once there go to ...
    • Updating the Miscellaneous Values when Switching Post Processors

      The Miscellaneous Values aren't always the same in each post processor, and the post processor is switched, the values don't always update. To reset the miscellaneous values in the toolpaths after switching to a different post processor, use the Edit ...
    • Changing the Default Opening Association

      First you will need to download the Default Programs Editor, a third party software. Default Programs Editor Once it's downloaded, and the Default Programs Editor.exe is on the desktop, double click, and select the first option,  File Type Settings. ...
    • Setting Defaults in the Control Definition

      The post processor is made up of 3 files, and the solution is going to go into the Control Definition. First with the post processor you want to work on loaded, go to the Machine Tab and then into the Machine Definition Manager. Once the Machine ...
    • X+ Installation Instructions

      Download the X+ installer for your version of Mastercam: https://www.gmccs.de/downloads-xplus.php?reseller=qte Make sure that Mastercam is closed, then go into the setup .ZIP folder and double-click on the .exe. If you get a Windows message, click ...