Setting Default Tool Settings

Setting Default Tool Settings

This solution will show how to set Tool Setting defaults in Mastercam.

In your Toolpath Manager you will need to expand the Properties and go to Files where you can find the Operations Defaults, and click on the exclamation point. 


Once there go to the top and click on Tool Settings. The Tool settings will open and you can choose how you want the default settings to look here, and once complete, click the green check mark.


The Next time Mastercam is booted, these settings will be loaded

    • Related Articles

    • Changing the Default Opening Association

      First you will need to download the Default Programs Editor, a third party software. Default Programs Editor Once it's downloaded, and the Default Programs Editor.exe is on the desktop, double click, and select the first option,  File Type Settings. ...

    • Setting Defaults in the Control Definition

      The post processor is made up of 3 files, and the solution is going to go into the Control Definition. First with the post processor you want to work on loaded, go to the Machine Tab and then into the Machine Definition Manager. Once the Machine ...

    • Import Custom Tools Into Tool Manager

      Many custom tools are available for download as .DXF files from a supplier’s website. You can download the .dxf files and utilize them as custom tools.  Open Mastercam Tool Manager  from the Windows Start meneu. (Start>All Programs>Mastercam2020>Tool ...

    • Setting Default Miscellaneous Values in X9

      To set the default Miscellaneous Values, first make sure you have your post processor loaded, and backed up. (Making a Zip2go of a part will put a copy of your current post in the file for back up)   Then go to Settings and down to Machine Definition ...

    • CoroPlus Tool Importer

      Mastercam used to require an .ACC file for the CoroPlus tool importer, but this is no longer the case. Users can download the install from Sandvik's ...