Mastercam Toolpath Manager in Solidworks is hidden.

The Mastercam Toolpath Managers tab in Solidworks will sometimes become hidden.

The problem is that Solidworks has two task panes.  Sometime the top task pane gets slide down showing the second task pane which does not have the Mastercam Toolpath Manager on it.  To fix this problem look for the small grey dot on the bottom of the task pane and pull it up to the top to show the first task pane.

• Related Articles

• Mastercam for Solidworks Command Manager Is Missing Tools

  If your Mastercam for Solidworks' tab in Solidworks is missing, or has the wrong toolpaths under the wrong tabs, refreshing the user interface in the Solidworks Windows Registries will reset the tabs in Solidworks. To fix this, first shut downs ...

• Making a Zip2go Using Mastercam for Solidworks

  This solution goes over how to make a Zip2go using Mastercam for Solidworks. The Zip2go function uses parts of Solidworks Pack and Go to zip up the Solidworks part, and then the Zip2go to zip up the associate Mastercam files, like the post processor ...

• Mastercam 2019 System Requirements

  Mastercam 2019 System Requirements See the table below for minimum and recommended system configurations for Mastercam. These recommendations are based on systems we have in use at CNC Software for testing and evaluation purposes. Our recommendation ...

• Importing Toolpaths from another Mastercam Part File.

  To import toolpaths from another Mastercam part file, you need to have a Machine Group loaded first. Drag and release the Mastercam part file with the toolpaths to import onto the Toolpath Manager. Select the toolpaths you want to import in the ...

• Import Custom Tools Into Tool Manager

  Many custom tools are available for download as .DXF files from a supplier’s website. You can download the .dxf files and utilize them as custom tools.  Open Mastercam Tool Manager  from the Windows Start meneu. (Start>All Programs>Mastercam2020>Tool ...