Importing Toolpaths from another Mastercam Part File.

To import toolpaths from another Mastercam part file, you need to have a Machine Group loaded first.

Drag and release the Mastercam part file with the toolpaths to import onto the Toolpath Manager.

Select the toolpaths you want to import in the Import Toolpath  Operations window, and the operations will be loaded into the new Mastercam file, all that's needed is Geometry and any other updates to the toolpaths for the new part. 

• Related Articles

• Resetting Mastercam Configuration

  To reset the Mastercam Configuration file, first make sure Mastercam shut down, then go into the Local Disk C drive, to Users, to your login, and to your documents to locate the "My Mastercam" folder for the version of Mastercam you want to reset. ...

• Consolidating Drill Toolpaths

  When a drill is being used in a couple of different toolpaths, it's possible to consolidate the points into one toolpath and sort the points out to be more efficient. In this example the spot drill will have all the points added and be sorted. Note: ...

• Mastercam Software Licensing Guide

  Mastercam Software Licensing Guide This help topic covers the installation, updating, and administrating of Mastercam's software license. Mastercam is a protected software and requires a license to run. The software license is digital and is managed ...

• Moving Mastercam Folders to a New Computer

  This solution will go over moving the necessary files from an old computer to a new computer in order to exactly duplicate the old computer's Mastercam setup. Before starting, make sure Mastercam on both PCs is shut down. There are two folders we ...

• How to Link Account to Mastercam Website

  The registration and linking process ensures that only Mastercam customers receive the benefits of Mastercam.com’s value-added content such as the Mastercam Forums and Knowledgebase. To register and link, please use the steps below: 1. Launch your ...