Updating Post Processor Maintenance Date
Custom Post Processors on Post Processor Maintenance will require an update upon renewal of the annual maintenance. This is a simple process that can be done quickly.
- Send a zip2go file that includes the Post Processor as well as the Machine and Control Definition to posts@qtemfg.com. Include in the subject of the email "Post Maintenance Update"
- Our support team will have the Post Processor updated with any new enhancements as well as properly setting the maintenance date.
- The updated Post Processor will be sent back in a reply to the ticket that was initiated from the request.
Related Articles
Post Processor Information
A post processor is made up of 3 main files, the Machine Definition, the Control Definition, and a PST file. (You will get a PSB file if the post is a custom post.) The Machine Definition is the machine's kinematics and limit settings. There is other ...
Renaming a Post Processor
Post processors are made up of 3 to 4 files, the Machine Definition, the Control Definition, the PST file, and a PSB file if its a custom post. These files read through a directory and look for the file's name as it is saved in the post processor, ...
Updating the Miscellaneous Values when Switching Post Processors
The Miscellaneous Values aren't always the same in each post processor, and the post processor is switched, the values don't always update. To reset the miscellaneous values in the toolpaths after switching to a different post processor, use the Edit ...
Loading and Managing a Post Processor
A post processor is made up of 3 or 4 files. The Machine Definition is the machine's kinematics, axis combinations, and machines limits. The Control Definition will change some of the output from the post processor like staged tool routines, N number ...
Mastercam 2020 Loading and Managing a Post Processor
A post processor is made up of 3 or 4 files. The Machine Definition is the machine's kinematics, axis combinations, and machines limits. The Control Definition will change some of the output from the post processor like staged tool routines, N number ...