Related Articles
X+ Installation Instructions
Download the X+ installer for your version of Mastercam: https://www.gmccs.de/downloads-xplus.php?reseller=qte Make sure that Mastercam is closed, then go into the setup .ZIP folder and double-click on the .exe. If you get a Windows message, click ...
Hasp Not Recognized
If the Hasp or NetHasp is not recognized, update the HaspX and NHaspX. Download the attached files, then extract the files. Once the files are extracted, run the ".exe" files. Then just make sure that that the NHaspX is set right for your hasp, or ...
How to Update a HASP
First, Download the new maintenance codes, look for an e-mail from Karen Willhite karenw@qtemfg.com. Once the new ".hcode" is downloaded, double click it to updated the HASP. Then a dialog box should pop up confirming that you updated the Hasp Make ...
Initializing the Hasp Drivers for Verisurf
Press the "Window key" and "R" to open the "Run" command, and hit "Browse". Go through the "C Drive" to the "Program Files" into "Mcam2018" and into the "Common" folder. Select the "hinstall.exe" and click on open When the "Run" command comes back ...
Error - CIMCO Editor is not found on Hasp
IF you are receiving an error message stating the CIMCO Editor is not found on your Hasp perform this procedure to make it work: Copy the Nethasp.ini file in to the C:\Program Files\mcamx7\common\Editors\CIMCOEdit5 fodler Note: This is for X7