Associating Files to open with X7
In Windows 7, Microsoft has changed the way the default programs function works. Previosly, Windows would look at the specific program executable filepath and use that. In Windows 7, Windows now looks directly at the executable file (.exe) for the default program.
The issue is that Mastercam X6 and X7 use the same executable file name (Mastercam.exe), so we are no longer able to set Mastercam X7 as the default opener for specific file types.
The attached zip file has a simple program that will allow us to assiocate files to open with X7, as well as a brief video on how to use the software.
Related Articles
Opening Inventor Drawing Files
Mastercam will open Inventor Drawings, but you'll need the Inventor Viewer. Got to https://www.autodesk.com/viewers/all-viewers/compare or search for Inventor Free Viewer. Download the and install the software and Mastercam will be able to open the ...
X+ Installation Instructions
Download the X+ installer for your version of Mastercam: https://www.gmccs.de/downloads-xplus.php?reseller=qte Make sure that Mastercam is closed, then go into the setup .ZIP folder and double-click on the .exe. If you get a Windows message, click ...
Deleting Temp Files Video
see attached Video location C:\Users\(your user name)\AppData\Local\Temp
Preparing files to send as Z2G
This short video demonstrates how to export files from Mastercam as a Zip2Go archive. This is the preferred method to send files to support@qtemfg.com
Updating Files for Mastercam 2019 (Migration Wizard)
There is a tool to update files to the nest version of Mastercam. You don't need to Migrate everything, and doing a "Basic Migration" may cause problems depending on how Mastercam was setup and configured. Using the "Advanced Migration" option will ...